0203 952 4822 07983 759320 Freephone 0800 112 3427 info@colddirect.co.uk Mon-Sat: 8 AM - 11 PM - 24/7 Emergency

Commercial walk-in cold room design and installation

Cold Room Installation London

Plan a new walk-in chiller or freezer room around your stock, site access and daily workload.

ColdDirect plans commercial cold room installation for London kitchens, shops and catering sites. We consider available space, access, ventilation, temperature requirements, stock flow and cleaning before specifying the room and refrigeration equipment.

Installation planning and commissioning

The work starts with site dimensions, door position, floor and drainage requirements, electrical supplies and condenser heat rejection. Equipment is selected for the intended duty rather than a one-size-fits-all package. On completion, controls, alarms, door operation and temperature performance are checked and explained to your team.

Chiller rooms and freezer rooms

Choose a walk-in chiller for fresh stock or a freezer room for frozen storage. We can also assess replacement of ageing panels, doors and refrigeration plant. Existing faults belong on our repair page; new rooms and upgrades are planned through this installation service.

Book ColdDirect

Call 07983 759320 or 0203 952 4822, or email info@colddirect.co.uk. Commercial equipment only.

Cold room repair London | Freezer room repair London

Speak to a commercial engineer

24/7 emergency bookings for London businesses.

Related London commercial repair & service hubs

Nearby London Areas & Specialist Brands We Cover

24/7 commercial refrigeration, freezer and air conditioning repair across London — trade only, F-Gas certified, fixed-rate call-out.

Specialist commercial services

Areas & new coverage

Specialist brands & guides

How we design and size a commercial cold room

A cold room that is too small warms up every time the door opens; one that is too large burns capital and electricity. Our installation process starts with a free site survey and a measured heat-load calculation — not a guess from a brochure. We count the door openings per hour, the product throughput, the kitchen's ambient temperature and any glass-fronted display load, then size the insulation and the refrigeration to match.

Design stepWhat we decide and why it matters
Heat-load surveyProduct volume, door traffic and ambient peaks sized into a kW duty figure
Panel specification80–100 mm PIR panels for chilled rooms, 100–150 mm for freezers, cam-locked and sealed
Refrigeration plantSplit or monoblock system sized with defrost strategy for the duty — never oversized "to be safe"
Floor & drainageInsulated floor specs, falls and drain heaters where wash-down is needed
Controls & alarmsCarel or Dixell controllers with high/low temperature alarms wired to alert you
CommissioningPull-down test to temperature, F-Gas record, operating manual and handover certificate

Transparent pricing & fixed-rate design consultation

Cold room installation in London is quoted as a fixed package: survey, panels, plant, electrical, commissioning and certification in one written price. Our design consultation is a fixed-rate, affordable visit — one agreed fee that is credited in full against the installation when you proceed. There is no per-hour meter and no surprise weekend loading. Compared with cutting a room from a kit, a properly sized Cold Direct installation is the cheap option over its life: correct sizing typically saves 20–30% on running electricity, and the F-Gas and HACCP paperwork is included so your EHO inspection goes quietly.

Service matrix — installation & replacement

IntentWhat we deliver
New cold roomDesign, supply and installation of walk-in chillers and freezers for restaurants, retailers and dark kitchens
Same-week replacementLike-for-like swap of a failed room around your trading schedule, often over two nights
Upgrade & re-panelDoor, floor and panel upgrades plus new energy-efficient plant on the existing slab
RelocationDecommission, move and recommission a room for a new site, with full F-Gas recovery records

Cold room installation FAQs

How much does a commercial cold room installation cost in London?

Every installation is quoted as a fixed package — survey, panels, plant, electrical work, commissioning and certification in one written price. The design consultation is a fixed-rate visit credited against the installation.

How long does a cold room installation take?

A typical walk-in room installs in 2–4 working days once panels and plant are on site; a like-for-like replacement can be phased over two nights to protect your trading schedule.

Do you handle F-Gas and legal paperwork?

Yes. Refrigerant handling is done by F-Gas certified engineers with full recovery records, and you receive commissioning certificates and operating documentation for your EHO and HACCP files.

Can you size the room properly for a dark kitchen or restaurant?

That is the core of the service: we run a measured heat-load calculation from door traffic, product throughput and ambient temperature, then size panels and plant to the duty — typically saving 20–30% on running electricity versus an oversized kit room.

Do you repair cold rooms as well as install them?

Yes — 24/7 emergency repair and planned servicing across London for the rooms we install and the ones we inherit.

Is the design consultation really fixed-price?

Yes: one agreed fee for the site survey and written design, credited in full against the installation when you proceed.